View GTL2020_42207.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
GTL2020/GTL2021/GTL2022/GTL2023 32-bit GTL terminator with octal enables
Product specification 2000 Jan 14
Philips Semiconductors
Philips Semiconductors
Product specification
32-bit GTL terminator with octal enables
GTL2020/GTL2021/ GTL2022/GTL2023
FEATURES
* GTL2020 rON is 56 typical connected to 1.5 V VBIAS * GTL2021 rON is 75 typical connected to 1.5 V VBIAS * GTL2022 rON is 100 typical connected to 1.5 V VBIAS * GTL2023 rON is 150 typical connected to 1.5 V VBIAS * Low power: 50 W * Switching speed: 5 ns max. * Channel on capacitance: 3 pF * VCC operating range: +5 V 10% * Latch-up protection passes Class II JESD78 * ESD protection exceeds 2000 V HBM per JESD22-A114,
200 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101
PIN CONFIGURATION
VBIAS0A EN0 A0 A1 A2 A3 GND VBIAS1A EN1 1 2 3 4 5 6 7 8 9 56 VCC 55 VBIAS0B 54 A4 53 A5 52 A6 51 A7 50 NC 49 VCC 48 VBIAS1B 47 A12 46 A13 45 A14 44 A15 43 NC 42 VCC 41 VBIAS2B 40 A20 39 A21 38 A22 37 A23 36 NC 35 VCC 34 VBIAS3B 33 A28 32 A29 31 A30 30 A31 29 NC
A8 10 A9 11 A10 12 A11 13 GND 14 VBIAS2A 15
* Available in TSSOP56 package
DESCRIPTION
The GTL202x series are 32-bit bus switches with GTL termination and octal output enables. The GTL202x is intended to provide GTL bus termination in multi-processor environments. The enable pins allow the system control to disconnect the bus termination. When the bus switch is enabled, a 56, 75, 100 or 150 series resistance is connected to the GTL Vbias.
EN2 16 A16 17 A17 18 A18 19 A19 20 GND 21 VBIAS3A 22 EN3 23 A24 24 A25 25 A26 26 A27 27 GND 28
SW00473
QUICK REFERENCE DATA
SYMBOL tPE/PD CON COFF PARAMETER Bus enable/disable Input capacitance switch on Input capacitance switch off CONDITIONS Tamb = 25C; GND = 0V CL = 20 pF, RL = 500 VIN = 0 V VIN = 0 V TYPICAL 2.5 3 6 UNIT nS pF pF
ORDERING INFORMATION
PACKAGES 56-Pin Plastic TSSOP Type II 56-Pin Plastic TSSOP Type II 56-Pin Plastic TSSOP Type II 56-Pin Plastic TSSOP Type II TEMPERATURE RANGE -40C to +85C -40C to +85C -40C to +85C -40C to +85C ORDER CODE GTL2020 DGG GTL2021 DGG GTL2022 DGG GTL2023 DGG DWG NUMBER SOT364-1 SOT364-1 SOT364-1 SOT364-1
2000 Jan 14
2
Philips Semiconductors
Product specification
32-bit GTL terminator with octal enables
GTL2020/GTL2021/ GTL2022/GTL2023
LOGIC DIAGRAM
A0 R VBIAS0A
FUNCTION TABLE
ENn L H NOTES: When enabled: Ports Ax connect to VBIASnA Ports Ay connect to VBIASnB Where: X = 0-3, 8-11, 16-19, 24-27 Y = 4-7, 12-15, 20-23, 28-31 SWITCH ON OFF
A7 EN0 A8
R VBIAS0B
R VBIAS1A
A15 EN1 A16
R VBIAS1B
R VBIAS2A
A23 EN2 A24
R VBIAS2B
R VBIAS3A
A31 EN3
R VBIAS3B
SW00474
Figure 1.
ABSOLUTE MAXIMUM RATINGS1
Above which the useful life may be impaired. For user guidelines, not tested. SYMBOL VCC VI Tstg Tamb DC input voltage Storage temperature range Ambient temperature range with power applied PARAMETER Supply voltage to ground potentials CONDITIONS Inputs and VCC only RATING -0.5 to +7.0 -0.5 to +7.0 -65 to +150 -40 to +85 UNIT V V C C
NOTE: 1. Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. this is a stress rating only and functional operation of the device at these or any conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability.
RECOMMENDED OPERATING CONDITIONS
SYMBOL VIH VIL VCC VIH VIL VBIAS Tamb PARAMETER TTL input HIGH voltage TTL input LOW voltage DC supply voltage High-level input voltage (control pin) Low-level input voltage (control pin) DC supply voltage Operating free-air temperature range TEST CONDITIONS Control Inputs Control Inputs LIMITS MIN. 2.0 -- 4.5 2.0 -- 1.35 -40 TYP.1 -- -- -- -- -- -- -- MAX. -- 0.8 5.5 -- 0.8 1.65 +85 UNIT V V V V V V C
2000 Jan 14
3
Philips Semiconductors
Product specification
32-bit GTL terminator with octal enables
GTL2020/GTL2021/ GTL2022/GTL2023
DC ELECTRICAL CHARACTERISTICS
VCC = 5 V 10%; Tamb = -40C to +85C SYMBOL II VIK PARAMETER Control inputs Switch inputs Input clamp voltage GTL2020 switch on resistance rO ON GTL2021 switch on resistance GTL2022 switch on resistance GTL2023 switch on resistance CIN CON COFF ICC ICC Input capacitance ENx pins Input capacitance, switch on Input capacitance, switch off Power supply quiescent Additional supply current per input pin2 TEST CONDITIONS VCC = 5.5 V, VI = VCC or GND VCC = 5.5 V, VI = 1.65 V, VBIAS = 0 V VCC = 4.5 V, IIK = -18 mA VCC = MIN, VIN = 0 V, VBIAS = 1.5 V VCC = MIN, VIN = 0 V, VBIAS = 1.5 V VCC = MIN, VIN = 0 V, VBIAS = 1.5 V VCC = MIN, VIN = 0 V, VBIAS = 1.5 V VIN = 0 V VIN = 0 V VIN = 0 V VBIAS = 1.5 OE = 0 V or VCC VCC = 4.5 V to 5.5 V; one input at VCC -3.0 V, other inputs at VCC or GND LIMITS MIN. -- -- -- 42 64 80 125 -- -- -- -- -- TYP.1 0.1 0.01 -0.85 56 75 100 150 5.6 3 6 -- 0.1 MAX. 1 1 -1.2 70 92 120 175 -- -- -- 10 0.5 UNIT A A V pF pF pF A mA
NOTES: 1. Typical values are shown at VCC = 5.0 V, +25C ambient and maximum loading. 2. This is the increase in supply current for each LVTTL input at the specified voltage level other than VCC or GND.
AC ELECTRICAL CHARACTERISTICS
VCC = 5 V 10%; Tamb = -40C to +85C; tr = tf = 2.5 nS SYMBOL tPE tPD tPE tPD tPE tPD tPE tPD Bus enable Bus disable Bus enable Bus disable Bus enable Bus disable Bus enable Bus disable PARAMETER GTL2020 GTL2021 GTL2022 GTL2023 WAVEFORM 1 1 1 1 1 1 1 1 TEST CONDITIONS CL = 20 pF, RL = 500 CL = 20 pF, RL = 500 CL = 20 pF, RL = 500 CL = 20 pF, RL = 500 CL = 20 pF, RL = 500 CL = 20 pF, RL = 500 CL = 20 pF, RL = 500 CL = 20 pF, RL = 500 LIMITS MIN. 1 1 1 1 1 1 1 1 TYP. - - - - - - - - MAX. 3 3 3 3 3 4 5 5 UNIT ns ns ns ns ns ns ns ns
AC WAVEFORMS
3.0 V Input 1.5 V 1.5 V 0V tPE tPD VOH VOH-0.3 V Ax VOL+0.3 V VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES
TEST CIRCUIT
VCC
VI PULSE GENERATOR RT D.U.T.
VO
20 pF
CL
RL = 500
Test Circuit for switching times DEFINITIONS
RL = Load resistor CL = Load capacitance includes jig and probe capacitance RT = Termination resistance should be equal to ZOUT of pulse generators.
SW00566
Waveform 1.
SW00565
Figure 2.
2000 Jan 14
4
Philips Semiconductors
Product specification
32-bit GTL terminator with octal enables
GTL2020/GTL2021/ GTL2022/GTL2023
TSSOP56: plastic thin shrink small outline package; 56 leads; body width 6.1mm
SOT364-1
2000 Jan 14
5
Philips Semiconductors
Product specification
32-bit GTL terminator with octal enables
GTL2020/GTL2021/ GTL2022/GTL2023
Data sheet status
Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.
Production
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 2000 All rights reserved. Printed in U.S.A. Date of release: 02-00 Document order number: 9397 750 06869
Philips Semiconductors
2000 Jan 14 6

▲Up To Search▲

Price & Availability of GTL2020

	To Download GTL2020 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .